CHERRY MOBILE SNAP HARD RESET 2014

CHERRY MOBILE SNAP HARD RESET 2014
Hello mga ka CM SNAP Meron kasing nag-papaHARD RESET Sakin ng SNAP pero hindi gumana yun android multi tool na ginamit ko so naghanap akong paraan para ma reset.
para sa meron problema sa "PATTERN ATTEMPTS"

Isa sa problema natin yun pag hard reset ng CM SNAP meron paraan pero need pa ng box like volcano or GPG dragon pero meron akong nakitang solution no need to use BOX 

 ituturo ko sa inyo pano mag hard reset na hindi na gagamit ng box :) 

MGA kakailangain

oras  MAGBASA :)
Follow the instruction carefully :)
Drivers
Debug Tool 
FDL Files 
SC8810 PAC 

----->DOWNLOAD<-----

STEP 1: Extract ninyo sa desktop 

STEP 2: Install the Driver 

STEP 3: Turn off your cm snap unpluged the usb cable (make sure na nainstall nyo n yun driver) 

STEP 4: open ninyo yun folder na inextract nyo 

Open: ResearchDownload\bin\ResearchDowload.exe 

open the load pocket

sundan nyo nalang ^_^

tapos open the FDL 1

Sundan nyo nalng ^_^

tapos FDL 2

make sure naka check lahat ng nasa picture aa ^_^

 CLICK "OK"

then hit

PLAY 

Ganito lalabas

NEXT  

HOLD NYO YUN POWER BUTTON NG CM SNAP 

while holding plug nyu ang USB CABLE

then hindi tayin nyo lumabas yun "PASSED"

Tapos pwede na ninyo i unpluged yung usb cable

then alisin nyo ang battery then balik nyo then open ok na yan RESET na ang CM SNAP NYO :) 

Categories: Tips, tutorials

How To Send Sms Online Without Registration

Hello friends, every one wanna free internet services like Send sms without registration, There are many sites which are giving you free send sms, when you search on net for like these website than Google give us all result, If we wanna use any site for send free MSG than, There is first requested for registration, some also need for verification code, These all are time wasting,  so you may wanna direct sending option, Using that you can easily send free massage without any registration.

Trick for send online sms without Registration

I am sharing with you some popular site which give send online sms without Registration facility, Just go these site and use it, Just follow there describe easy steps and dot it.

www.smsti.in

www.freesmsportal.com

www.smsmaza.org

www.bollywoodmotion.com

www.e-freesms.com

http://freesms.smsix.ne

Note - Below Sites Trace Your  IP so Don't Miss use it.
Final Words

Fans i wanna say you don't miss use these sites, These site are traced your IP address, This give you you free and enjoy full service without registration msg service, Thanks for visit and keep visit for more tips and tricks and many more.

Thanks........

Categories: news, Tips, tutorials

How To View Saved Password In Google Chrome

This trick is simple yet very powerful to view or hack saved password in Google chrome. It does not matter for which website the password is saved it will work on all of them. It will work on Facebook, Gmail, Yahoo, twitter and many more. If you get your hands on your friend computer you can hack their password with this simple little trick. It does not require any software or addons to be installed on your computer.

How to view saved password in google chrome ? 

• Open Google Chrome 
• Go to Settings (Its on the Right Corner) 
• Then Click on Advance Settings 
• Scroll Down and their will be password and forms from their click on Manage saved password. 
• Then list of all websites whose passwords are saved on browser will be listed. 
• Click on show to view those passwords

Categories: Tips, tutorials

How To View Saved Password In Mozilla Firefox

How to view saved password in Mozilla Firefox web browser. This trick can be helpful if you get your hands on someone computer maybe your friends and he has saved password for certain websites like Gmail, Facebook, yahoo etc then you can easily view his password with very simple and easy trick 

                                                    How To Do ? 

• Open Firefox Web Browser.
• Then Click on Firefox > Option > Option as shown in below picture .
• Then a POP Up box will appear, In that go to security and click on Show Passwords .
• Now click on website whose password you want to see and click on "show password" .
• (Note: It will ask for confirmation so click on yes when dialog box appears) .
• Done, You have hacked password of your victim with few simple steps. 
• You can try this at your college computer lab if someone have saved their password.

Categories: Tips, tutorials

Find IP Address Of Any Website With Command Prompt

Find Ip Address of any website using Command Prompt or in short CMD. Using IP Address you can find location of the website server and do more stuff. This trick is demostrated with Google but you can use this method to find IP Address of any website like twitter, facebook etc. 

How to find IP ? 

1. Go to Start > Type CMD and press Enter. 
2. Now write Ping followed by website URL whose IP you want to find.

3. It will take less then a second and come up with the results as shown below. 

Categories: Tips, tutorials

How To Find Serial Key Of Any Software

Most of you download and use pirated software from torrents or any such other sites, but sometime it gets very difficult to find serial key of those software. This Trick will make it easy for you  to find serial key of any software very easily.

How To Find Serial Key Of Any Software ? 

The key 94FBR is a part of Office 2000 Pro CD activation key that is widely distributed as it bypasses the activation requirements of Office 2000 Pro. By searching for 94fbr and the product name, you are guarantee that the pages that are returned are pages dealing specifically with the product you're wanting a serial for. Follow simple steps given below to learn this trick 

Step:1. Go to Google.Com

Step:2. Then type Software Name 94FBR  
Replace Software Name with the name of software whose serial key you want to find 
Eg: To find serial key of Nero i will type Nero 94fbr 
Step:3. Now press Enter and you will find serial key of software you are looking for as shown below.

Categories: Tips, tutorials

How To Get Admin Password From Guest Account

Ever wanted to hack your college PC with guest account/student or just wanted to hack your friend’s PC to make him gawk when you tell him your success story of hacking? 

Well,there is a great way of hacking an administrator account from a guest account by which you can reset the administrator password and getting all the privileges an administrator enjoys on windows.. 


Concept: Press shift key 5 times and the sticky key dialog shows up.This works even at the login screen. But If we replace the sethc.exe which is responsible for the sticky key dialog,with cmd.exe, and then call sethc.exe by pressing shift key 5 times at logon screen,we will get a command prompt with administrator privileges because no user has logged on. From there we can hack the administrator password,even from a guest account. 


Prerequisites: 

Guest account with write access to system32. 

Here is how to do that - 

• Go to C:/windows/system32  
• Copy cmd.exe and paste it on desktop 
• Rename cmd.exe to sethc.exe 
• Copy the new sethc.exe to system 32,when windows asks for overwriting the file,then click yes. When asked to overwrite,overwrite the sethc.exe 
• Now log ut from your guest account and at the user select window,press shift key 5 times. 
• Instead of sticky Key confirmation dialog,command prompt with full administrator privileges will open. 
• Now type “ NET USER ADMINISTRATOR aaa” where “aaa” can be any password you like and press enter. 
• You will see “ The command completed successfully” and then exit the command prompt and login into administrator with your new password. 
• Congrats You have hacked admin from guest account. 

Further.. 

Also, you can further create a new user at the command prompt by typing “NET USER Noreen/ADD” where “Noreen” is the username you would like to add with administrator privileges. 

Then hide your newly created admin account by - Go to registry editor and navigating to this key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserLis t] 

Here create a new DWORD value, write its name as the “user name” that u created for your admin account!

Categories: Tips, tutorials

How To Hide Folder Name In Windows XP/7/8/Vista

Basically you can not make folder with no name on windows. This trick will allow you to make folder without any name. This trick works on any windows operating system.

How To Make Nameless Folder Before attempting this trick, try to make a folder with no name and you will fail to do so. This is what this trick will let you do. Below is screenshot of folder before and after doing this  trick "Creating Nameless Folder"

• Make a "New folder" on desktop or where ever you want. 
• Right click on this newly created folder and select Rename. 
• Erase the text showing "New Folder". 
• Now keep Pressing Alt (i.e alter key) and type 255. 
• If you are on laptop then you need to enable your Num Lock and type from the highlighted number keys not from those below function keys. 
• After that leave alt key and Press enter. 
• Done you just created nameless folder.

Categories: Tips, tutorials

Building Internet Firewalls

Author(s): 
D. Brent Chapman
Elizabeth D. Zwicky
Edition: 
1st
Date Published: 
November 1995.
Description: 

In the five years since the first edition of this classic book was published, Internet use has exploded. The commercial world has rushed headlong into doing business on the Web, often without integrating sound security technologies and policies into their products and methods. The security risks--and the need to protect both business and personal data--have never been greater. We've updated "Building Internet Firewalls" to address these newer risks.

What kinds of security threats does the Internet pose? Some, like password attacks and the exploiting of known security holes, have been around since the early days of networking. And others, like the distributed denial of service attacks that crippled Yahoo, E-Bay, and other major e-commerce sites in early 2000, are in current headlines.

Firewalls, critical components of today's computer networks, effectively protect a system from most Internet security threats. They keep damage on one part of the network--such as eavesdropping, a worm program, or file damage--from spreading to the rest of the network. Without firewalls, network security problems can rage out of control, dragging more and more systems down.

Like the bestselling and highly respected first edition, "Building Internet Firewalls," 2nd Edition, is a practical and detailed step-by-step guide to designing and installing firewalls and configuring Internet services to work with a firewall. Much expanded to include Linux and Windows coverage, the second edition describes:

Firewall technologies: packet filtering, proxying, network address translation, virtual private networks

Architectures such as screening routers, dual-homed hosts, screened hosts, screenedsubnets, perimeter networks, internal firewalls

Issues involved in a variety of new Internet services and protocols through a firewall

Email and News

Web services and scripting languages (e.g., HTTP, Java, JavaScript, ActiveX, RealAudio, RealVideo)

File transfer and sharing services such as NFS, Samba

Remote access services such as Telnet, the BSD "r" commands, SSH, BackOrifice 2000

Real-time conferencing services such as ICQ and talk

Naming and directory services (e.g., DNS, NetBT, the Windows Browser)

Authentication and auditing services (e.g., PAM, Kerberos, RADIUS);

Administrative services (e.g., syslog, SNMP, SMS, RIP and other routing protocols, and ping and other network diagnostics)

Intermediary protocols (e.g., RPC, SMB, CORBA, IIOP)

Database protocols (e.g., ODBC, JDBC, and protocols for Oracle, Sybase, and Microsoft SQL Server)


The book's complete list of resources includes the location of many publicly available firewall construction tools.

Categories: Tips, tutorials

Forensic Toolkit

Tools to help examine NTFS for unauthorized activity.

The Forensic ToolKit™ contains several Win32 Command line tools that can help you examine the files on a NTFS disk partition for unauthorized activity. We built these tools to help us do our job, we hope they can help you as well.

Key Features
AFind is the only tool that lists files by their last access time without tampering the data the way that right-clicking on file properties in Explorer will. AFind allows you to search for access times between certain time frames, coordinating this with logon info provided from ntlast, you can to begin determine user activity even if file logging has not been enabled.

HFind scans the disk for hidden files. It will find files that have either the hidden attribute set, or NT's unique and painful way of hiding things by using the directory/system attribute combination. This is the method that IE uses to hide data. HFind lists the last access times.

SFind scans the disk for hidden data streams and lists the last access times.

FileStat is a quick dump of all file and security attributes. It works on only one file at a time but this is usually sufficient.

Hunt is a quick way to see if a server reveals too much info via NULL sessions.
Command Line Switches
afind [dir] /f [filename] /ns=no subs /a after /b before /m between
time format =

hfind [dir] /hd=find dir/system attribs /ns=no subs

sfind [dir] /ns=no subs

filestat [filename]

hunt [\\servername]

System Requirements
Windows NT 4.0 SP3
16MB Memory
Administrator privileges
Audit log enabled with searchable records
Set NT command line buffer to 500 or more lines. 1200 or more lines works well

Site URL: 
http://www.mcafee.com/us/downloads/free-tools/forensic-toolkit.aspx

Download URL: 
Tools to help examine NTFS for unauthorized activity.

The Forensic ToolKit™ contains several Win32 Command line tools that can help you examine the files on a NTFS disk partition for unauthorized activity. We built these tools to help us do our job, we hope they can help you as well.

Key Features
AFind is the only tool that lists files by their last access time without tampering the data the way that right-clicking on file properties in Explorer will. AFind allows you to search for access times between certain time frames, coordinating this with logon info provided from ntlast, you can to begin determine user activity even if file logging has not been enabled.

HFind scans the disk for hidden files. It will find files that have either the hidden attribute set, or NT's unique and painful way of hiding things by using the directory/system attribute combination. This is the method that IE uses to hide data. HFind lists the last access times.

SFind scans the disk for hidden data streams and lists the last access times.

FileStat is a quick dump of all file and security attributes. It works on only one file at a time but this is usually sufficient.

Hunt is a quick way to see if a server reveals too much info via NULL sessions.
Command Line Switches
afind [dir] /f [filename] /ns=no subs /a after /b before /m between
time format =

hfind [dir] /hd=find dir/system attribs /ns=no subs

sfind [dir] /ns=no subs

filestat [filename]

hunt [\\servername]

System Requirements
Windows NT 4.0 SP3
16MB Memory
Administrator privileges
Audit log enabled with searchable records
Set NT command line buffer to 500 or more lines. 1200 or more lines works well

Site URL: 
http://www.mcafee.com/us/downloads/free-tools/forensic-toolkit.aspx

Download URL: 
http://downloadcenter.mcafee.com/products/tools/foundstone/ForensicToolkit20.zip

Categories: Tips, tools, tutorials

Password Recovery on Windows XP

Introduction:

Lost or forgotten the password to your Windows XP computer? Don't worry, it can be easier to retrieve than you think. What's described below is for educational purposes and to be used only on your own system or that you have permission to do so, also these only work for local system accounts.

Using Safe Mode:

This method will only work if the Safe Mode Administrator account is not password protected (the case more often than you think!) but in a pinch it might be your only option to check.

1) Reboot the computer by whatever means you deem appropriate at that time.

2) Once the Bios notices loads take note of the hot key to enter Safe Mode and hit it.

3) Enter any of the Safe Mode versions but I'd recommend sticking to Safe Mode with no networking.

4) You have 3 options to get to the same end (that I know of at least).

4.1) Navigate to the Control Panel and enter the User Accounts screen, select the user account(s) in question, and select the option to "Remove Password". If this is not available skip to bullet #5.

4.2) Reboot the computer once more and enter the account(s) that were specified in bullet #4 without the need to enter a password.

5) Enter DOS if possible.

5.1) Enter Run (if available) and type in "control userpass2" to the Users Panel. If the Run option is not available for some reason skip to bullet 6.0, if these options are not available skip to the Software portion of this.

5.2) From here either reset or blank out the password on the account(s) in question or even create a new account with whatever user level you want.

5.3) Reboot the computer once more and enter the account(s) that were specified in bullet #5.2.

6.0) If Run isn't available you can make a batch file to get you there as well. Enter Notepad or whatever text editor available that supports saving "All Files".

6.1) Type out the command "control userpass2", perform a "Save As", name it whatever you want but be sure to name the extension a *.bat (which is why the "All Files" part comes in.

6.2) Double click the batch file to run the command you saved in it and you're in the Users Panel, move back up to bullet 5.1.

Using Third Party Software:

7) Two very useful utilities I've found that work (with a bit of time) 99.99% of the time if the above options are not available are EBCD and Ophcrack. You need to insert one of these CD's and reboot in order to use them. Refer to their documentation at the time of use for the most up to date information.

7.1) The fastest option is called EBCD (Emergency Bootable CD) found at http://www.prime-expert.com/ebcd/. It's a Linux Live CD (aka an operating system that runs without needing to be installed) that attempts to remove the password on specified account(s) completely and of course doesn't need to be logged into Windows to run so security is at a minimal. Unfortunately to download it now is behind a pay wall but older versions can probably be found easily enough.

7.2) The best option by far, since it leaves the existing password intact on the system is using a Linux Live CD called Ophcrack which has a very robust brute force password cracker. Length of time need to crack the password will depend on the speed of the PC's RAM and CPU, length/complexity of the password, speed/condition of the CD drive optics and rotating components. In my experience it usually takes 5-15 minutes at worst for an average user's password. A Windows Vista version exists as well.

7.3) Reboot the computer once more and enter the account(s) that were specified in bullet #7.2.

Keep in mind there a a LOT of other ways to go about this process but the above has always been as much as I ever needed.

Reference: 
http://www.prime-expert.com/

http://ophcrack.sourceforge.net/

Categories: Tips, tutorials

DVD or CD-ROM Not appearing My Computer

Sometimes after installing or uninstalling an application especially those that
contain virtual hardware like Daemon Tools and Clone CD You end up
unable to use your CD/DVD-ROM which despite the efforts of all known
methods of reboots and system restore cannot fix.

So How Do I Fix This Issue?

Most people go through the long process of reinstallation where as others try
to find a way to solve this problem once off by doing so you can save
yourself a world of trouble in the future. This weekend it struck yet again as
a poor soul updated his Daemon tools.

So on with the show here is the process I use to resolve this issue

Open regedit using the run command
Go though the following keys Hkey_Local_Machine -> System ->
CurrentControlSet -> Control -> Class -> {4D36E965-E325-11CE-
BFC1-08002BE10318}
Within this key delete all the content One key will usually give you
the finger which I think it is the default within Properties nevermind
it. Next up close the regeditor and reboot the computer if you had no
success then well I guess you will need to reinstall. Also note some people
say just have to delete the upper or lower filter key I find it better to just
go clean out the entire thing.

Categories: Tips, tutorials

New Look for your Facebook

New Look for your Facebook

Try this very awesome Tip, to use your Facebook in a whole new look.But, you need to have a Google Chrome Browser. Because the tools that we are going to use is a Chrome extension.

SCREENSHOT:

FACEBOOK HOMEPAGE

CHATBOX

INSTRUCTION:

1. Click THIS to get NewGenBook Desktop extension for your Google Chrome Browser.

2. Click "add to chrome",a confirmation will popup, just click "add" to add the extension in your Google Chrome.

Screenshot:

3. Wait for a few seconds to install the extension to your Google Chrome.

4. Refresh your Facebook page by pressing "f5" on your keyboard and experience the whole new look of facebook.

NOTE: To Get back the original looks of facebook, just disable the NewGenBook Desktop extension.To do this,Go to google Chrome Settings then click extension at the upper left corner then disable the extension.

HAVE FUN EVERYONE!

DON'T FORGET TO SHARE THIS TO YOUR FRIENDS!

THANK YOU!

Categories: news, tutorials

Remove Your Last Name on Facebook

Remove Your Last Name on Facebook

Hello guys, Today, I'm gonna show you how to remove / hide your facebook last name. Just follow the steps below.

STEP 1
Find Indonesian Proxy Here:
Free Proxy List

SCREENSHOT

STEP 2
Open Firefox, if you don't have firefox, then download it :D
Then Go to, Options>>Anvanced>>Network>>Settings.

SCREENSHOT

STEP 3

At the Connection Settings, click "Manual Proxy Configuration",then put your chosen Indonesian proxy and port on the textbox. Then check the "Use this proxy server for all protocols", and click "OK".

SCREENSHOT:

STEP 4

Go to Facebook (if you get a connection problem, or the page doesn't load, just choose another proxy. then go back to STEP 4).

Login your acct then go to Account Settings.(if it prompts you some security issue / question just finish it, Because its a facebook security feature, that if you logged in in another place that you don't usually use or its not the place where you usually open your facebook, it will ask some security questions.)

STEP 5

Go to your Account Settings.

SCREENSHOT

STEP 6

Go to Language, then choose "Bahasa Indonesia", then click "Save Changes"

SCREENSHOT

STEP 7

Then go to Name, then delete your last name.

SCREENSHOT

then don't forget to put your password here.

So you will be able to save the changes.

SCREENSHOT

STEP 8

Go to language again to change it back to English.

SCREENSHOT:

YOUR DONE!

HAVE FUN EVERYONE!

Categories: news, tutorials

Change Google Logo with Your Name

Hi Everyone, Today I'm gonna show you how to change the Google Logo with Your Name or any Text that you want.

INSTRUCTION:

1. Visit this SITE.

2. Then Enter your Name or any text that you want to display.

3. Choose a style and click "create my search engine"

In my case I entered "WARCOTEX"

Your Done! You Can set is as Your Homepage.

You can also try This Site:

Googlelogo.net

HAVE FUN GUYS!

Categories: news, tutorials

GLOBE BUG - GoSakto 1 Month Unli Surf (one shot)

GoSakto 1 month unli surf

by using this trick you can avail a promo of 1 month unli surf, but you have 800mb limit per day.
txt GOcomboEEE1400 to 8888 
then dial, just pick one of the following.... 

*143*1*1*7*1*5*1*5*5*4*1#(recommended) 

*143*1*1*7*1*5*1*5*5*3*1# 

*143*1*1*7*1*5*1*5*5*2*1# 

wag n lng kau mag status bka mkatay, try to browse directly 

at kung hndi pwede ulitin lng o iiba ang dial code, khit sori ang reply s inyo try to browse parin para makita mo kung successful. 

PROPER TIMING: pagkapindot ng send button, w8 3 seconds then pindot the dial button, dapat mauna mawala ung message at dun pa lng sunod ung dial.. 

CREDITS TO: Johnny Dan Mercado

Categories: news, tutorials

Windows 7 Installation Guide (with Windows 7 Installer)

Windows 7 Installation Guide
Windows 7 Installer are clean and untouch. Direct Download

In this guide I will explain how to install Windows 7 in a maximum of 40 minutes by both DVD and USB. This guide is for any version of Windows 7 and both x86 and x64 are installed the same way. To start you will need an ISO image of the version of Windows 7 you have chosen and either a DVD or USB Drive. See below for ISO download links.

FAQ: Frequently Asked Questions
Q: What are the system requirements to run Windows 7?
A: The system requirements are as follows:
Of course it's recommended to a higher specification than that MS has given us.
* 1 GHz (or faster) 32-bit (x86) or 64-bit (x64) processor
* 1GB RAM (32-bit) / 2GB RAM (64-bit)
* 16GB available disk space (32-bit) / 20GB (64-bit)
* DirectX 9 graphics processor with WDDM 1.0 or higher driver
* DVD-ROM Drive or USB Drive
* Audio output capability
* Internet access capability

Q: Should I install the 32-bit or 64-bit version of Windows 7?
A: If your computer has a central processing unit (CPU) that is capable of running a 64-bit version of Windows, then you can install the 64-bit version of Windows 7.
To find out if your processor is 64-bit-capable in Windows 7 or Windows Vista, do the following:

1. Open Performance Information and Tools by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type Performance Information and Tools, and then, in the list of results, click Performance Information and Tools.

2. Do one of the following:
In Windows 7, click View and print detailed performance and system information.
In Windows Vista, click View and print details.

3. In the System section, you can see what type of operating system you're currently running under System type, and whether or not you can run a 64-bit version of Windows under 64-bit capable. (If your computer is already running a 64-bit version of Windows, you won't see the 64-bit capable listing.)

Q: Where do I find a Windows 7 ISO Image?
A: below are links of windows 7 integrated with service pack 1.

below are windows 7 iso image..Direct download

Windows 7 Home Premium x86 English
Windows 7 Home Premium x64 English
Windows 7 Professional x86 English
Windows 7 Professional x64 English
Windows 7 Ultimate x86 English
Windows 7 Ultimate x64 English

Preparing the DVD from the ISO image

You will need a DVD Burner, a DVD burning software and a blank DVD-R or DVD-RW to prepare the installation disk. You can use any of the popular burner programs out there but I prefer PowerISO. Here is a link to CDBurnerXP - http://cdburnerxp.se/ which is a free alternative.

Using the DVD burning software of your choice, burn the Windows 7 ISO image to the DVD. Make sure you choose a very low burning speed, 4x or 8x, for better results. 

Preparing the USB from the ISO image

Here are the five simple steps that you need to follow to create a bootable USB flash drive to install Windows 7 from USB device:

Note: You need a USB flash drive with a minimum of 4 GB of free space. And also please backup your data from USB first.

1. Download WinSetupFromUSBor Winusb Maker and open it.

2. Run the program, browse to your Windows 7 ISO image using the Browse button. 

3. In this step, you need to select your media type. As we are here to create a bootable USB, simply click on USB Device button.

4. Select your USB flash drive from the drop down box and click on Begin copying button.

5. The WinsetupfromUSB will take a few minutes to complete the procedure.

Boot from Windows 7 DVD/USB
Now that you have created your installation media it is time to start the installation. The first step is to place your Windows 7 DVD into the DVD tray or insert the USB into a free USB port and boot the machine. Your computer needs to be configured to boot from DVD/USB. This is done via BIOS. On most computers, the BIOS menu can be accessed by pressing either the F2 or Del keys while the machine is booting. If you are booting from your DVD select your DVD drive and if USB select the USB drive (It should be an item by itself in the menu but if not select Removable Devices). seeImage 

After your selection press any key if you see “Press any key to continue message” to continue. Next a "Windows is loading files” window will appear. This is loading any drivers needed for installation and copying any needed files into memory. see Image 

Then you will see the Starting Windows Animation appear. see Image 

After a few moments, you will reach the installation menu. Your first step is to choose the Language, Time and currency format, and Keyboard layout. Make your selections by using the pull down menus and press the Next button. see Image 

Here we have the option of repairing a previous installation or Install Now. Since this is a clean installation of Windows 7 and not a repair, Install Now is the proper choice. Highlight the Install Now button to continue to the next screen. see Image

Windows 7 is working in the background. This may take several minutes depending on the system. see Image 

Here we see the License Agreement you must accept before continuing. After reading the agreement, check the box next to I accept the license terms and select Next button. see Image 

Here we would be able to choose an Upgrade install (if running setup from a previous version of Windows, such as Vista) or a Custom (clean) install. Select the whole box containing Custom (advanced) to continue to the next screen. see Image

This is the important step as you need to select the drive which you have already prepared for the Windows 7 installation. Note that selecting a wrong partition will wipe out the data. Also note that the installation creates another small partition of 200 MB if you are installing on an empty hard drive. Don’t worry as the 200MB partition will not be shown in explorer. see Image 
Inexperienced users can simply highlight the unallocated space and click Next. The partitioning layout will be created for them. However, we want to explore additional features. To this end, we need to expand the Drive options (advanced). see Image 

You now have the option to create new partitions, format them with a desired filesystem, change the size of existing or newly created partition (Extend), or delete them. The Load Driver function is usually necessary if you want to create more complex setups like RAID. According to official system requirements, Windows 7 needs 16 GB of free space. However, you can do with less. The minimum recommended space for a partition where you want to place Windows 7 is 10350MB. Eventually, the installation itself will take approx. 7 GB.

Just for your information, here's a snippet of what would happen if you try to install Windows 7 on a partition that does not meet the minimum expected size limit: see Image
After finishing your particular partition configuration that you desire, select the Next button to continue. Windows may restart many times during the installation and you need not to worry about that. This process can take 10 to 60 minutes depending on the system. see Image 

Here we see the system needing to reboot to continue installation tasks. You can hit the Restart Now button or just allow the reboot to happen automatically after several seconds. see Image

First Restart

Here we see progress as Windows 7 updates the registry settings. This process may take several minutes before going to the next screen. see Image

Windows 7 starts up required services at this point in the setup process. see Image 

Windows 7 continues to install.

After initial setup is complete, another reboot is required with no user input. see Image
Second Restart

This is the screen you will be greeted with upon each boot. Windows 7 is starting up! see Image

Setup is now preparing the system for initial booting. Unlike the previous screen capture, you will not see this on each boot. see Image 

Here is where Windows 7 tests the systems video performance to see if Aero will be enabled or not. This test will only last a few minutes. see Image 

Here is where the initial account creation happens. This user will have full administrator privileges and automatically be logged in after setup is completed. Enter in your user name and computer name as you would like it to be identified on the network and then select the Next button. see Image

This screen prompts you to enter a password for the account that you just created. I highly recommend that put password to your account. Enter it twice, and then include a "password hint" to help remind you of what it is if you misplace or forget it. You, of course, should not enter in your actual password in this field, but a subtle reminder to jog your memory. After this information is entered, select the Next button. see Image
The next step is to activate your Windows. uncheck Automatically Activate Windows and do not enter a product key. select next button. seeImage

This screen asks you to configure your Automatic Updates settings. I recommend to most users to Use Recommended Settings here. These options can always be changed later. Make your selection to continue to the next screen. see Image
Ensure that your time zone is entered correctly and that the correct date and time is selected. (I recommend taipei) After this information is verified, select the Next button. see Image

If you are currently connected to the internet the following screen will display. Your location will determine the firewall settings for your newly installed Windows 7. You have three choices: home, work or public network. Home and work networks are supposed to be trusted, so you should not experience any problems adding other machines to your group or sharing data with them. However, the public network is meant to be untrusted. So if you have installed Windows 7 in, let's say, Internet cafe, then you should choose the third option. see Image 

Windows 7 is now connecting to the network. This is where your initial IP address is acquired and internet connectivity is verified. see Image

Windows 7 is finally... finalizing settings. This should only take a few moments to complete. see Image 

Not much to say here. your computer will restart here. see Image 
Your initial desktop is setup here. This process will take a few moments, but only happen once. see Image

Windows 7 is now finished being installed and are greeted with the desktop. It is worth noting that you did not need to log in this time, but after rebooting (or logging off). Activate your windows 7 using this loader see Image 

Post Install

After installation I suggest that you install all available updates via Windows Update and install anti-virus software. I suggest using Microsoft Security Essentials or Kaspersky.

The safest way to solve not geniune issue of Windows 7

important info:
Support for Windows 7 sp1 ends on April 9, 2013. That means no more service pack 1 updates so if you want updates, install service pack 1.

Please feedback for any broken link.. Thanks!

Categories: news, Software, tutorials